Table of Contents
Advertisement
Admin Password : Log in as a admin user and is allowed to change its own,
New Password : Enter a new password if desired
Check New Password : Enter the same new password again to check.
Admin Login Methods : Only root user can enable or disable system login methods
and change services port.
Enable HTTP : Check to select HTTP Service.
Enable HTTPS : Check to select HTTPS Service
HTTPS Port : The default is 443 and the range is between 1 ~ 65535.
If you already have an SSL Certificate, please click "Upload Key" button to select the
file and upload it.
Enable Telnet : Check to select Telnet Service
Telnet Port : The default is 23 and the range is between 1 ~ 65535.
Enable SSH : Check to select SSH Service
SSH Port : Please The default is 22 and the range is between 1 ~ 65535.
Click "Generate Key" button to generate RSA private key. The "host key footprint" gray
blank will display content of RSA key.
Ping Watchdog : The ping watchdog sets the OW-215N2-X Device to continuously
ping a user defined IP address (it can be the internet gateway for example). If it is
unable to ping under the user defined constraints, the OW-215N2-X device will
automatically reboot. This option creates a kind of "fail-proof" mechanism.
Ping Watchdog is dedicated for continuous monitoring of the particular connection to
remote host using the Ping tool. The Ping works by sending ICMP "echo request"
packets to the target host and listening for ICMP "echo response" replies. If the
defined number of replies is not received, the tool reboots the device.
Enable Ping Watchdog : control will enable Ping Watchdog Tool.
IP Address To Ping : specify an IP address of the target host which will be
monitored by Ping Watchdog Tool.
Ping Interval : specify time interval (in seconds) between the ICMP "echo
requests" are sent by the Ping Watchdog Tool. Default is 300 seconds.
CERIO software core : cen_v3.0
Advertisement
Table of Contents
