Network Utility - Cerio OW-215N2-X User Manual

8.3 Network Utility

The administrator can diagnose network connectivity via the PING or TRACEROUTE utility.
Please click on Utilities -> Network Utility and follow the below setting.
Ping : This utility will help ping other devices on the network to verify connectivity. Ping utility,

using ICMP packets, detects connectivity and latency between two network nodes. As result
of that, packet loss and latency time are available in the Result field while running the PING
test.
IP/Domain : Enter desired domain name, i.e. www.google.com, or IP address of the

destination, and click ping button to proceed. The ping result will be shown in the Result
field.
Count : By default, it's 5 and the range is from 1 to 50. It indicates number of

connectivity test.
Traceroute : Allows tracing the hops from the OW-215N2-X device to a selected outgoing IP

address. It should be used for the finding the route taken by ICMP packets across the
network to the destination host. The test is started using the Start button, click Stop button to
stopped test.
Destination Host : Specifies the Destination Host for the finding the route taken by

ICMP packets across the network.
MAX Hop : Specifies the maximum number of hops( max time-to-live value) trace route

will probe.
CERIO software core : cen_v3.0