Cerio OW-215N2-X User Manual page 109

Rules :
Control can be managed by a rule. Use the settings on this screen to establish an access policy.
Comment : Enter a descriptive name for this rule for identifying purposes.

MAC Address : Enter MAC address in valid MAC address format(xx:xx:xx:xx:xx:xx) and click

"Add" button to add in the MAC group of each rule. Click "Remove" button can remove MAC
address in the group of each rule. There are 10 MAC address maximum allowed in each rule.
Local / Destination IP : Specify local(LAN)/ destination IP addresses range required for this

rule. If you specify local IP addresses range from 192.168.1.1 to 192.168.2.254. The matches
a range of local IP addresses include every single IP address from the first to the last, so
the example above includes everything from 192.168.1.1 to 192.168.2.254.
Protocol : Select Any or specify protocol(TCP, UDP, ICMP, Content Filter and Application)

from drop-down list. When you select ICMP or Layer 7 Application , the Local(LAN)/
Destination Port can not used.
CERIO software core : cen_v3.0