Table of Contents
Advertisement
5. CPE + AP Mode Configuration
When WISP + AP Mode is chosen, the system can be configured as an WISP + AP Mode. This section
provides detailed explanation for users to configure in the WISP + AP Mode with help of illustrations. In
the WISP + AP Mode, functions listed in the table below are also available from the Web-based GUI
interface.
5.1 Choose Your Operating Mode ( CPE + Repeater AP Mode )
The system administrator can set the desired mode via this page, and then configure the system
according to their deployment needs, Please click on System -> Operating Mode and follow the
below setting.
5.2 External Network Connection ( Network Requirement )
It can be used as an Outdoor Customer Premises Equipment (CPE) to receive wireless signal
over last mile application, helping WISPs deliver wireless broadband Internet service to residents
and business customers. In the CPE mode, OW-215N2-X is a gateway enabled with NAT and
DHCP Server functions. The wired clients connected to OW-215N2-X are in different subnet from
those connected to Main Base Station, and, in CPE mode, it does not accept wireless association
from wireless clients.
In CPE mode, the WAN port is the Wireless interface.
CERIO software core : cen_v3.0
Advertisement
Table of Contents
