Configure Cpe(Wan) Setup - Cerio OW-215N2-X User Manual

5.3 Configure CPE(WAN) Setup

OW-215N2-X is a gateway enabled with NAT and DHCP Server functions. The wireless clients
connected to Internet.
There are three connection types for the WAN port : Static IP, Dynamic IP, PPPoE and PPTP.
Please click on System -> CPE and follow the below setting.
Mode : By default, it's "Static IP". Check "Static IP", "Dynamic IP", "PPPoE" or "PPTP"to

set up system WAN IP
Static IP : Users can manually setup the WAN IP address with a static IP provided

by WISP.
 IP Address : The IP address of the WAN port; default IP address is 192.168.1.254
 IP Netmask : The Subnet mask of the WAN port; default Netmask is 255.255.255.0
 IP Gateway : The default gateway of the WAN port; default Gateway is 192.168.1.1
CERIO software core : cen_v3.0