Cerio OW-215N2-X User Manual page 68

ESSID : Extended Service Set ID, When clients are browsing for available wireless networks,

this is the SSID that will appear in the list. ESSID will determine the service type available to
AP clients associated with the specified VAP.
Enable Repeater AP : choose Enable or Disable Repeater AP function, the default is

Disable
Hidden SSID : By default, it's "Disable". Enable this option to stop the SSID broadcast in

your network. When disabled, people could easily obtain the SSID information with the site
survey software and get access to the network if security is not turned on. When enabled,
network security is enhanced. It's suggested to enable it after AP security settings are
archived and setting of AP clients could make to associate to it.
Client Isolation : By default, it's "Disable". Select "Enable", all clients will be isolated from

each other, which means they can't reach each other.
IAPP : Inter Access-Point Protocol is designed for the enforcement of unique association

throughout a ESS(Extended Service Set) and for secure exchange of station's security
context between current access point (AP) and new AP during hand off period.
Maximum Clients : The default value is 32. You can enter the number of wireless clients that

can associate to a particular SSID. When the number of client is set to 5, only 5 clients at
most are allowed to connect to this VAP.
Security Type : Select the desired security type from the drop-down list; the options are

Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP
802.1X.
Disable : Data are unencrypted during transmission when this option is selected.

WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit

or 128-bit shared key.
CERIO software core : cen_v3.0