Table of Contents
Advertisement
Route Information : Select "Route Information" on the drop-down list to display route
table. OW-215N2-X could be used as a L2 or L3 device. It doesn't support dynamic routing
protocols such as RIP or OSPF. Static routes to specific hosts, networks or default gateway
are set up automatically according to the IP configuration of system's interfaces. When used
as a L2 device, it could switch packets and, as L3 device, it's capable of being a gateway to
route packets inward and outward.
ARP Table Information : Select "ARP Table Information" on the drop-down list to display
ARP table.
ARP associates each IP address to a unique hardware address (MAC) of a device. It is
important to have a unique IP address as final destination to switch packets to.
CERIO software core : cen_v3.0
Advertisement
Table of Contents
