Panel Function Description; Software Configuration - Cerio OW-215N2-X User Manual

SNMP Traps to a List of IP Address

Support Event log


1.5 Panel Function Description

There is several LED indicators on the front of the OW-215N2-X. Please refer to the definitions
below :
4
8
(1) The Ethernet connect of LAN2 Port / PoE out
(2) The LED indicator of LAN2 Port
(3) At in Reset button , and Support Ground connection
(4) The Ethernet connect of LAN1 Port(PoE in)
(5) The LED indicator of LAN2 Port
(6) Power LED
(7) The three LED's for strong or weakly indicator on signal bridge, and the three LED's only
support "Client Bridge + Repeater AP and WISP + Repeater AP modes".
(8) Built-in 15dBi Directional Antenna

1.6 Software Configuration

OW-215N2-X supports web-based configuration. Upon the completion of hardware installation,
OW-215N2-X can be configured through a PC/NB by using its web browser such as Internet
Explorer 6.0 or later.
6
3
5 7 2
CERIO software core : cen_v3.0
1