Create Virtual Ap - Virtual Ap Setup - Cerio OW-215N2-X User Manual

2.6 Create Virtual AP – Virtual AP Setup
The administrator can create Virtual AP via this page. Please click on Wireless -> Virtual AP
Setup and follow the below setting.
VAP: Display number of system's Virtual AP.

MAC Address : The MAC address of the VAP Interface is displayed here. When you enable

AP and reboot system, the MAC address will display here
ESSID: Display Virtual AP's ESSID; default is AP00~AP07.

Status: Display VAP status; default VAP0 is always on and only VAP0 can support WPS

function.
Security Type: Display Virtual AP's Security Type; default is disabled.

MAC Filter Setup: Click "Setup" button for configuring Virtual AP's Access Control List.

VAP Edit: Click "Edit" button for configuring Virtual AP's settings and security type.

Change these settings as described here and click Save button to save your changes. Click
Reboot button to activate your changes
CERIO software core : cen_v3.0