Table of Contents
Advertisement
MAC Access Control is the weakest security approach. WPA or WPA2 security methods
should be used when possible.
2.8 WDS Setup - Expand your Wireless Network
The administrator can create WDS Links for expanding wireless network via this page. When you
enable "WDS" function in AP Mode both Wireless and Ethernet user can connect your local
network at the same time through OW-215N2-X. Please click on Wireless -> Virtual AP Setup,
click "Edit" of Virtual AP List and follow the below setting.
Service: By default, it's "Disable". To "Enable" to activate WDS
Enable: Click Enable checkbox to create WDS link.
WDS Peer's MAC Address: Enter the MAC address of WDS peer.
Description: Description of WDS link.
Change these settings as described here and click Save button to save your changes. Click
Reboot button to activate your changes.
2.9 WDS Status
The Peers MAC Address, antenna 0/1 received signal strength, phy mode and channel bandwidth
for each WDS are available.
CERIO software core : cen_v3.0
Advertisement
Table of Contents
