Repeater Ap Mac Filter Setup - Cerio OW-215N2-X User Manual

5.12 Repeater AP MAC Filter Setup

Continue Virtual AP Setup section. For each Virtual AP setting, the administrator can allow or
reject clients to access each Virtual AP.
Action: Select the desired access control type from the drop-down list; the options are

Disable, Allow or Reject.
 Only Allow List MAC: Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to "Only Allow List MAC".
 Only Deny List MAC: Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to "Only Deny List MAC".
MAC Access Control is the weakest security approach. WPA or WPA2 security methods
should be used when possible.
There are a maximum of 20 clients allowed in this "Enable" List. The MAC addresses of the
wireless clients can be added and removed to the list using the Add and Remove buttons.
CERIO software core : cen_v3.0