Safety Messages; Safety - General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - norbar EvoTorque EBT Series Operator's Manual

SAFETY MESSAGES

The safety messages are provided to cover reasonable situations that may be encountered when operating,
servicing or repairing cordless tools. It is the responsibility of operators and servicing technicians to be
knowledgeable about the procedures, tools and materials used, and to satisfy themselves that the
procedures, tools and materials will not compromise their safety, that of others in the work place or the tool.
Use only with Norbar EvoTorque
®
Read EvoTorque Battery Pack (EBP series)
Charge only with Norbar EvoTorque
®
Read EvoTorque Battery Charger (CTC123 (60335))
SAFETY – GENERAL POWER TOOL SAFETY WARNINGS
Symbol
WARNING:
Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

•
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.

Electrical Safety

•
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
•
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
4
®
Battery Pack (EBP series) batteries.
Operator's Manual
®
Battery Charger (CTC / EBC Series) equipment.
Meaning
The exclamation mark is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the manual.
READ ALL SAFETY WARNINGS, INSTRUCTIONS, ILLUSTRATIONS AND
SPECIFICATIONS PROVIDED WITH THIS POWER TOOL. FAILURE TO
FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC
SHOCK, FIRE AND/OR SERIOUS INJURY.
#34466
Operator's Manual
#34468