Table of Contents
Advertisement
Loading Media in the Multi-purpose Tray
The multi-purpose (MP) tray serves as an additional tray for loading any type of media
that ranges in size from 91 mm × 254 mm to 216 mm × 356 mm (3.6≤ × 10≤ to 8.5≤ × 14≤
inches). Use it to load a single sheet or a stack of media, depending on the media's type
and thickness.
Use the multi-purpose tray to accomplish the following:
Print on standard and special media
• Standard media
– Plain paper [75 to 165 g/m
• Special media
– Labels
– Transparency (The print quality may not be stable. Use the media tray for best
reliability.)
Two-sided printing (doubles-sided) on plain paper
You should not expect the same print quality and reliability that you get with one-sided
printing. For details, refer to page 113.
Setting media thickness switch
Because the printer accommodates various media weights from the multi-purpose tray,
media thickness can be manually selected for the most reliable paper-picking. Follow
these steps:
1
Open the left side cover ( (1) ). The green media thickness switch is
located on the paper feeder and has three settings:
(1)
2
Move the switch to the desired setting.
Switch setting
Thin (Default)
Middle
Thick
3
Close the left side cover.
Selecting a multi-purpose tray mode
The multi-purpose tray has three different ways of feeding media: Cassette, First, and
Manual modes. For details on selecting a mode, refer to page 45.
2
(20 to 44 lbs.)]
Thin
Thick
Middle
Laser paper 75 to 90 g/m
Laser paper 91 to 123 g/m
Transparency, Label, Coated paper
Laser paper 124 to 165 g/m
Setup
Media
2
(20 to 24 lbs.)
2
(25 to 32 lbs.)
2
(33 to 44 lbs.)
19
Advertisement
Table of Contents
