Restart Automatically; View Log; View System Information - Speco N64NR24TB User Manual

Device Management

11.6 Restart Automatically

You can set the
StartSettingsSystemMaintenanceAuto Maintenance to go to the interface as shown below. Enable auto
maintenance, set the interval days and point of time and then click "Apply" to save the settings. The NVR will restart
automatically at the pointed time every interval days.

11.7 View Log

Click StartSettingsSystemMaintenanceView Log to go to the log view interface. Select the log main type, click
to set start time and end time and then click "Search" button. The searched log files will be displayed in the list.
Choose the log file in the list and then click "Export" button to export the log file. Click
to pop up a menu list. Check contents in the menu list and then the log list will show the checked log contents only.
Click to play the video log.

11.8 View System Information

Click StartSettingsSystemInformation and then click the corresponding menu to view the "Basic", "Camera
Status", "Alarm Status", "Record Status", "Network Status" and "Disk" information of the system.
automatic restart time for the NVR to
89
NVR User Manual
maintain it regularly.
on the "Content" title bar
Click