EZ Setup & Main Interface
Manual : Set the "Sensor Record", "Motion Record" and "Schedule Record" of each camera. Click "OK" to save. See
7.1.1 Mode Configuration
7
QRCode. Enable the NAT function in the interface or set it in the network configuration after exiting the wizard
(please refer to
1 2 .1. 8 NAT Configuration
for iOS and Android to easily and securely view your cameras. Please refer to
details. Click "OK" to save the settings.
3.2 Main Interface
3.2.1 Main Interface Introduction
for details.
for details). You can scan the QRCode through the Speco Blue App available
1 3 .1 Mobile Client Surveillance
13
NVR User Manual
for