Date And Time Configuration - Speco N64NR24TB User Manual

NVR User Manual
Device Management
c
Device Name : The name of the device. It may display on the client end or CMS that help user to recognize the device
remotely.
Video Format : Two modes: PAL and NTSC. Select the video format according to the camera.
Sequence Automatically: Check it and set "wait time". The system will sequence automatically if it is not operated
during the time you set.

11.2.2 Date and Time Configuration

Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the NVR. The default time zone is GMT+08 Beijing,
Hong Kong, Shanghai, Taipei. If the selected time zone includes DST, the DST of the time zone will be checked by
default. Click "Apply" to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual : select "Manual" in the "Synchronous" option and then click
after the "System Time" option to set the
system time.
NTP : select "NTP" in the "Synchronous" option and then enter the NTP server.
86