Disk; Disk Management - Speco N64NR24TB User Manual

Record & Disk Management
The camera will start analytics recording once you finish the above settings. This function is only available for some
IPCs.

7.5 Disk

7.5.1 Disk Management

Disk Management

Click StartSettingsDiskDisk Management to go to disk management interface. You can view the NVR's disk
number and disk status and so on in the interface. Click "Formatting" button to format the HDD.
Data Encryption:
① Click "Data Encrypt".
② Enter the username and password used to log in the NVR. This user shall have the permission of disk management.
③ Check the disk you want to encrypt and then enter the password.
After you encrypt the data of a disk, this disk cannot be read by other NVRs unless it is unlocked.
Data Decryption:
① Click "Change Encrypt".
② Enter the username and password used to log in the NVR. This user shall have the permission of disk management.
③ Check the disk you want to decrypt and then empty the password.
④ Click "Close Encrypt".
Unlock the disk: when one encrypted disk is transferred from another NVR to this NVR, it will be in locked status. Then
you can select this locked disk and click "Unlock". After you enter the password of its data encryption, its status will
be "Read Only". Now you can read the data of this disk but it cannot be written anything.
RAID

① Enable RAID
(Go to StartSettingsDiskDisk Mode)
43
NVR User Manual