Combination Alarm; Smart Event; Face Detection - Speco N64NR24TB User Manual

Alarm Management
2 Enable or disable "Record", "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The
alarm handling settings of motion alarm the same as the sensor alarm (see
3 Click "Apply" to save the settings. You can click "Motion Settings" to go to the motion configuration interface.

9.3 Combination Alarm

① Click StartSettingsAlarm Combination Alarm to go to the following interface.
② Customize combination alarm. Set alarm name and click "Configure" under the Combined Alarm Configuration item.
Then select alarm type and alarm source. Finally, click "OK" to save the settings.
③ Enable or disable "Record", "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The
alarm handling setting of combination alarm is similar to that of the sensor alarm (see
④ Click "Apply" to save the settings.

9.4 Smart Event

9.4.1 Face Detection

Face Detection: Alarms will be triggered if target people intrude into the pre-defined alarm areas.
Click StartSettingsCamera Smart Settings Face Detection to go to the following interface.
1
9.1 Sensor Alarm
60
NVR User Manual
for details).
9.1 Sensor Alarm for details).