People Intrusion Detection - Speco N64NR24TB User Manual

Alarm Management
③ Click "Apply" to save the settings. You can click "Crowd Density Config" to go to the crowd density detection
configuration interface.

9.4.3 People Intrusion Detection

Only some versions may support this function. If your NVR doesn't support this function, please skip the following
instructions.
People Intrusion Configuration:
Alarms will be triggered if someone enters into the detection area.
① Click StartSettingsCamera Smart SettingsPeople Intrusion to go to the following interface.
②Select the camera, enable the people intrusion detection and set the duration and sensitivity.
③ Click "Apply" to save the settings.
④Click "Processing Mode" to go to the alarm handling configuration interface of people intrusion detection.
People Intrusion Detection Alarm Handling Configuration:
① Click StartSettingsAlarm People Intrusion to go to the following interface.
② Enable or disable "Record", "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The
alarm handling setting of people intrusion detection alarm is similar to that of the sensor alarm (see
for details).
③ Click "Apply" to save the settings. You can click "People Intrusion Config" to go to the people intrusion detection
configuration interface.
63
NVR User Manual
9.1 Sensor Alarm