Speco N64NR24TB User Manual page 88

Device Management
② Install a certificate.
* You can create a private certificate here. Click the "Create" button to create a private certificate. Enter the country
(only two letters available), domain (NVR's IP address/domain), validity date, password, province/state, region and so
on. Then click "OK" to save the settings.
* If there is a signed certificate, click "Browse" to select it and then click "Install" to install it.
* Click "Create a certificate request" to enter the following interface.
Click "Create" to create the certificate request. Then download the certificate request and submit it to the trusted
certificate authority for signature. After receiving the signed certificate, import the certificate to the device.
③ After the certificate has been installed, enable this function and apply it. Then the camera can be accessed by
entering https://IP: https port via the web browser (eg.https://192.168.1.201:443).
Server Port : the default server port of the NVR is 6036. The server port number can be changed as required. The
port is mainly used in network video management system.
POS Port: the default HTTP port of the NVR is 9036.
Note: The HTTP port and server port of the NVR should be mapped to the router before you access the
NVR via WAN.
RTSP Port : RTSP real-time stream protocol can be used to control the sending of real-time data. By media player (like
VLC player) which supports the RTSP real-time stream protocol, you can view the live images synchronously. The
default RTSP port is 554 and it can be changed as needed. (The address format: rtsp://IP
address:554/chID=1&streamType=main or rtsp://IP address:554/chID=1&streamType=sub; main indicators main
stream; sub indicators sub stream; chID indicators channel ID).
Examples : ① Enable RTSP and "Anonymous". Then open the VLC player and enter the address (for example:
rtsp://192.168.1.88:554/chID=1&streamType=main) in the network address bar of the VLC player. Then you can view
81
NVR User Manual