Sealer Default Settings; How To Set The Default Mixed Sealing - quadient IS-5000 User Manual

8.7
Sealing Default Mode
As supervisor, you can set the sealing state by default.
Three sealing modes are available:
• Sealing on: nested and sealed
• Sealing on: nested and closed flaps
• No sealing.
See also
Checking the Sealing Mode
•

How to Set the Default Mixed Sealing

8
You have to connect as a Supervisor (see
To modify the default mixed sealing:
1. As supervisor:
From the main menu, select the path:
Default Mixed Sealing
2. Choose one of the three states.
3. Press [OK] to validate.
236

Sealer Default Settings

on page 49
How to Log in as Supervisor
Default User Settings
on page 220).
Base settings