Recommended Maintenance Schedule(S) - Toro Workman UTX Operator's Manual

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 50 hours
Before each use or daily
Every 100 hours
Every 250 hours
Every 500 hours
Every 750 hours
Every 1,000 hours
Every 2,000 hours
Maintenance Procedure
• Check and adjust the alternator belt.
• Check the intake/exhaust-valve clearance. Adjust, if necessary.
• Torque the wheel-lug nuts.
• Check the seat belt(s) for wear, cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly.
• Check the tire pressure.
• Check the engine-oil level.
• Check the level of the coolant.
• Remove debris from the engine area and radiator.
• Check the brake-fluid level. Check the brake-fluid level before you start the engine.
• Check the condition of the wheels and tires.
• Check the steering and suspension for loose or damaged components.
• Check the front wheel alignment.
• Check the brakes.
• Grease the machine (lubricate more frequently in heavy-duty applications).
• Change the air-cleaner filter (more frequently in dusty or dirty conditions).
• Change the engine oil and filter.
• Check and adjust the alternator belt.
• Check the positive crankcase ventilation (PCV) valve. Clean, if necessary.
• Torque the wheel-lug nuts.
• Check the transaxle-fluid level.
• Check the condition of the drive belt and clean the clutches.
• Check the spark-plug wires.
• Check the timing belt. Replace, if necessary.
• Check the intake/exhaust-valve clearance. Adjust, if necessary.
• Check the fuel lines and connections.
• Change the transaxle fluid.
• Check the front differential oil level.
• Check the coolant hoses for cracks, swelling, or deterioration.
• Replace the drive belt.
• Change the spark plugs.
• Change the front differential oil.
• Change the engine coolant.
• Change the brake fluid.
• Replace the timing belt.
73