Table of Contents
Advertisement
6.
Loosely secure the right, rear roll bar assembly
to the right, rear frame tube using 1 flange-head
bolt (3/8 x 2-1/4 inches) and 1 locknut (3/8 inch)
as shown in
Figure
Figure 36
36.
7.
Repeat step
8.
Loosely secure the right roll bar connector
assembly to the right, rear roll bar assembly
using 2 hex-head bolts (3/8 x 1-1/4 inches) and
2 locknuts (3/8 inch) as shown in
9.
Repeat step
g364845
35
6
on the left side.
Figure
Figure 37
8
on the left side.
37.
g364840
Advertisement
Table of Contents
