Table of Contents
Advertisement
2-Wheel Drive/4-Wheel
Drive/Differential Lock Indicator
Note:
When the indicator
means that the setting is not engaged/inactive; when
it becomes solid, it is engaged/active.
Refer to
Figure 63
and the corresponding table for
using the 2-wheel drive/4-wheel drive switch and
differential lock switch together.
Figure 63
1. Up position—engages
4-wheel drive
2. Down position—engages
2-wheel drive
3. Up position—engages
both the front and rear
differential locks
(Figure
62) is blinking it
4. Mid position—engages the
rear differential lock only
5. Down
position—disengages
the differential lock(s)
2-Wheel
Drive/4-Wheel
Drive Switch
Position
2
2
2
1
1
1
g388483
Cruise Control/Speed-Limited
Indicator
If the cruise control is set, the indicator illuminates
(Figure
62).
If the top speed of the machine is limited, the indicator
illuminates. The speed is limited if the following
occurs:
•
The cruise control is set.
•
There is a fault code.
•
A seat belt is not buckled.
Headlights Indicator
The headlights indicator illuminates when the
headlights are in the O
Seat Belt Indicator
The seat belt indicator illuminates when the operator
does not have their seat belt fastened.
Note:
If the seat belt is not fastened, the machine
speed will be limited.
Fault Code Indicator
The fault code indicator illuminates and the
corresponding fault code number appears when a
machine fault occurs.
55
Differential Lock
Switch Position
5
No indicator
4
3
(blinking—inactive
configuration)
5
4
3
position.
N
Result
Advertisement
Table of Contents
