Recommended Maintenance Schedule - Toro Workman 3100 Operator's Manual

Maintenance

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 5 hours
After first 10 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1200 hours or 2
years (whichever
occurs first)
1
immediately after every washing, regardless of the interval listed
Important Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Replace the engine oil and filter.
Check cable adjustments
Check pump drive belt tension
Torque wheel lug nuts
Replace transaxle filter
Check the battery fluid level.
Check the battery cable connections.
Lubricate engine pre filter
Replace engine oil and filter
Lubricate all grease fittings
Inspect condition and wear of tires
Remove engine shrouds and clean fins
Check cable adjustments
Check pump drive belt tension
Replace air cleaner filter
Check engine RPM (idle and full throttle)
Torque wheel lug nuts
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace fuel filter
Replace transaxle filter
Change transaxle oil
Clean transaxle strainer
Replace spark plugs
Pack front wheel bearings
Replace all interlock switches
Fuel tank–drain/flush
Change brake fluid
33