Toro Workman UTX Operator's Manual page 45

27. Secure the right seat belts as follows:
A. Remove the cap from the top portion of the
seat belt (Figure
B. Insert seat belt into the roll bar seat belt
bracket and secure the seat belt using a
locknut (7/16 inch) as shown in
Torque the locknut (7/16 inch) to 48.8 N∙m
(432 in-lb) as shown in
C. Install the cap
D. Repeat these steps for the left seat belts.
54).
Figure
Figure 54.
(Figure 54).
54.
45
Figure 54
g364833