Maintenance; Recommended Maintenance Schedule(S) - Toro 07363 Operator's Manual

Air cooled gas utility vehicle
Table of Contents

Advertisement

Maintenance

If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 8 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Check the condition and tension of the pump drive belt.
• Torque the front and rear wheel nuts.
• Check the shift cables adjustment.
• Replace the hydraulic filter.
• Change oil and oil filter.
• Change the oil and oil filter.
• Check engine oil level.
• Check the transaxle/hydraulic fluid.
• Check the tire pressure.
• Check the brake fluid level.
• Clean and re-oil the air cleaner foam pre-cleaner. (Every 25 hours if operating
conditions are extremely dusty or sandy)
• Inspect the air cleaner paper element.
• Check the battery fluid level. (Every 30 days if in storage)
• Check the battery cable connections.
• Lubricate all bearings and bushings.
• Change the oil and oil filter.
• Check the condition of the tires.
• Remove the blower housing and other cooling shrouds and clean the cooling fins
and external surfaces. (Clean more frequently in dirty conditions.)
• Change oil and oil filter.
• Torque the front and rear wheel nuts
• Change the air cleaner paper element.
• Check the shift cables adjustment.
• Check the high—low cable adjustment.
• Check the differential lock cable adjustment.
• Inspect service and parking brakes.
• Check the parking brake adjustment.
• Check brake pedal adjustment. (Front hood can be removed to ease adjustment.)
• Check the condition and tension of the pump drive belt.
• Check the accelerator adjustment.
• Check the clutch pedal adjustment.
• Check lines and connections. (Inspect for deterioration, damage, or loose
connections.)
• Replace the filter canister.
• Check the front wheel toe-out.
• Visually inspect brakes for worn brake shoes.
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman 3100

Table of Contents