Table of Contents
Advertisement
Removing Debris from the
Cooling System
Service Interval: Before each use or daily—Remove
debris from the engine area and
radiator.
1.
Park the machine on a level surface.
2.
Shift the transmission lever to the P (P
position.
3.
Shut off the engine and remove the key.
4.
Clean the engine area thoroughly of all debris.
5.
Remove the 7 screws securing the grill and
remove the grill
(Figure
Figure 109
1. Screw
6.
Clean the radiator assembly using compressed
air.
Note:
Blow debris away from the radiator.
7.
Install the grill using the previously removed 7
screws
(Figure
109).
)
ARK
109).
g365212
2. Grill
99
Advertisement
Table of Contents
