Table of Contents
Advertisement
Engaging the Differential Lock(s)
1.
Ensure that the machine speed is 8 km/h (5
mph) or less and your foot is off the accelerator
pedal.
2.
Press the differential-lock switch to the mid
position to engage the rear differential lock
(Figure
73).
Press the differential-lock switch to the up
position to engage the front and rear differential
locks
(Figure
73).
Note:
The differential lock(s) are only active
when the differential-lock switch is pushed.
Note:
The differential-lock(s) icon appears on
the display when you engage the differential
lock.
Disengaging the Differential
Lock(s)
With your foot off the accelerator pedal, disengage
the differential lock(s) by pressing the differential-lock
switch to the down position
Note:
The differential-lock(s) icon will not be
illuminated on the display when the switch is
disengaged.
Note:
You can release the differential lock(s) while
the machine is in motion. The differential lock(s) may
stay engaged while an axle load is present. The
differential lock(s) release once you remove an axle
load.
(Figure
73).
Controlling the Engine
Throttle While in the P
(P
) Position
ARK
If you are warming up the engine in cold weather or
if you need to charge your battery using the engine,
do the following:
1.
Shift the transmission lever to the P (P
position.
2.
With one foot on the brake pedal, simultaneously
press your other foot on the accelerator pedal.
Note:
There is no throttle control while in the
N (N
) position.
EUTRAL
68
)
ARK
Advertisement
Table of Contents
