Codabar; Codabar Enable/Disable; Codabar Check Character Calculation - Datalogic QuickScan QM24 Series Product Reference Manual

Enter/Exit Programming Mode
The following options apply to the Codabar symbology.

Codabar Enable/Disable

When disabled, the reader will not read Codabar bar codes.
DEFAULT
$CCBEN01(CR)
Codabar = Enable

Codabar Check Character Calculation

Enable this option to enables/disables calculation and verification of an optional Codabar check
character. When disabled, any check character in the label is treated as a data character
DEFAULT
$CCBCC01(CR)
Codabar Check Character Calculation = Enable AIM standard
144
check char.

CODABAR

$CCBEN00(CR)
$CCBCC00(CR)
Codabar Check Character Calculation = Don't Calculate
$CCBCC02(CR)
Codabar Check Character Calculation = Enable Modulo 10
QuickScan™ I QD24XX/QBT24XX/QM24XX
Codabar = Disable
check char.
Codabar