Label Id; Label Id: Pre-Loaded Sets - Datalogic QuickScan QM24 Series Product Reference Manual

Enter/Exit Programming Mode

Label ID

A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the
ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology
type. It can be appended previous to or following the transmitted bar code data depending
upon how this option is enabled. This feature provides options for configuring custom Label
IDs or individually per symbology (see
program the reader to always include an industry standard label identifier for ALL symbology
types, see the previous feature
See Label ID, starting on page 247

Label ID: Pre-Loaded Sets

The reader supports two pre-loaded sets of Label IDs. See
page 247 for details on the USA set and EU set.
When changing from one Label ID set to another, all other reader configuration set-
tings, including the host interface type, will be erased and set to the standard factory
defaults. Any custom configuration or custom defaults will be lost.
CAUTION
$Ae(CR)
Label ID Pre-loaded Set = EU Set
58
"Individually Set Label ID"
"Global AIM ID" on page 55.
of "References" for more information on setting this feature.
on page 59). If you wish to
Label ID: Pre-loaded Sets, starting on
$AE(CR)
Label ID Pre-loaded Set = USA Set
DEFAULT
QuickScan™ I QD24XX/QBT24XX/QM24XX