Gs1 Databar™ Expanded Set Length 1 - Datalogic QuickScan QM24 Series Product Reference Manual

1D Symbologies
GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the bar code lengths for
on page 160. Length 1 is the minimum label length if in
the first fixed length if in
characters only. The length can be set from 1 to 74 characters.
Table 17 provides some examples for setting Length 1. See
on setting this feature.
Table 17. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL1
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Fixed Length on page 243
EXAMPLES
01 Character
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
GS1 DataBar™ Expanded Length Control
Variable Length on page 243
Mode. Length includes the bar code's data
page 243
07 Characters 52 Characters
'0' and '7' '5' and '2'
~
CANCEL
Mode, or
for detailed instructions
74 Characters
'7' AND '4'
161