Upc-A 2D Component; Upc-E; Upc-E Enable/Disable - Datalogic QuickScan QM24 Series Product Reference Manual

Enter/Exit Programming Mode

UPC-E

UPC-A 2D Component

This feature enables/disables a requirement that a 2D label component be decoded when a
base label of this symbology is decoded.
$CAB2D00(CR)
DEFAULT
EAN-13 2D Component =
Disable (2D component not required)
$CAB2D01(CR)
EAN-13 2D Component =
2D component must be decoded
UPC-E
The following options apply to the UPC-E symbology.

UPC-E Enable/Disable

When disabled, the reader will not read UPC-E bar codes.
$CEBEN00(CR)
UPC-E = Disable
$CEBEN01(CR)
DEFAULT
UPC-E = Enable
92 QuickScan™ I QD24XX/QBT24XX/QM24XX