Usb-Oem Device Usage; Usb Interface Options - Datalogic QuickScan QM24 Series Product Reference Manual

Enter/Exit Programming Mode

USB-OEM Device Usage

The USB-OEM protocol allows for the reader to be identified as one of two different types of bar
code scanners. Depending on what other scanners you may already have connected to a USB-
OEM POS, you may need to change this setting to enable all devices to communicate.
Options are:
• Table Top Scanner
• Handheld Scanner
It may be necessary to switch device usage when connecting two readers/scanners of
the same type to a POS system.
$CIBUT01(CR)
USB-OEM Device Usage = Handheld Scanner

USB Interface Options

This feature provides for an interface-specific control mechanism.
DEFAULT
$CIFIH01(CR)
Ignore Scanner Configuration Host Commands
50
$CIBUT00(CR)
USB-OEM Device Usage = Table Top Scanner
DEFAULT
$CIFIH00(CR)
Obey Scanner Configuration Host Commands
QuickScan™ I QD24XX/QBT24XX/QM24XX