I 2 Of 5 Set Length 2 - Datalogic QuickScan QM24 Series Product Reference Manual

1D Symbologies

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in
fixed length if in Fixed Length on page 243
data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 8 provides examples for setting Length 2. See
ting this feature.
Table 8. I 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT I 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
5
Appendix D, Keypad
6 Scan ENTER/EXIT PROGRAMMING MODE
$CI2L2
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
EXAMPLES
Ignore This
Length
00
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
I 2 of 5 Length Control on page
Variable Length on page 243
Mode. The length includes the bar code's check and
page 243
4 Characters
04
'0' and '4'
~
Enter/Exit Programming Mode
Mode, or the second
for detailed instructions on set-
14 Characters 50 Characters
14
'1' and '4'
CANCEL
131.
50
'5' AND '0'
133