Solving Printer Problems - Lexmark MX417 Series User Manual

Troubleshooting
Unformatted flash detected [53]
Try one or more of the following:
•
From the printer control, select Continue to stop the defragmentation and continue printing. For
non‑touch‑screen printer models, press
•
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Weblink server not set up. Contact system administrator.
Select Continue to clear the message. For non‑touch‑screen printer models, press
Note: If the message appears again, then contact your system support person.

Solving printer problems

•
"Basic printer problems" on page 246
•
"Hardware and internal option problems" on page 248
•
"Paper feed problems" on page 251
Basic printer problems
The printer is not responding
Action
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Step 2
Check if the printer is in Sleep mode or Hibernate mode.
Is the printer in Sleep mode or Hibernate mode?
Step 3
Check if one end of the power cord is plugged into the printer and
the other to a properly grounded electrical outlet.
Is the power cord plugged into the printer and a properly grounded
electrical outlet?
to confirm.
Yes
Go to step 2.
Press the Sleep
button to wake the
printer from Sleep
mode or Hibernate
mode.
Go to step 4.
246
to confirm.
No
Turn on the printer.
Go to step 3.
Plug one end of the
power cord into the
printer and the other
to a properly
grounded electrical
outlet.