Solving Printer Problems - Lexmark C2132 User Manual

Troubleshooting
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
Unformatted flash detected [53]
Try one or more of the following:
•
From the printer control, select Continue to stop the defragmentation and continue printing. For
non‑touch‑screen printer models, press
•
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to
clear the message and continue printing. For non‑touch‑screen printer models, press

Solving printer problems

Basic printer problems
The printer is not responding
Action
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Step 2
Check if the printer is in Sleep mode or Hibernate mode.
Is the printer in Sleep mode or Hibernate mode?
Step 3
Check if one end of the power cord is plugged into the printer and
the other to a properly grounded electrical outlet.
Is the power cord plugged into the printer and a properly grounded
electrical outlet?
to confirm.
Yes
Go to step 2.
Press the Sleep
button to wake the
printer from Sleep
mode or Hibernate
mode.
Go to step 4.
171
to confirm.
No
Turn on the printer.
Go to step 3.
Plug one end of the
power cord into the
printer and the other
to a properly
grounded electrical
outlet.