Table of Contents
Advertisement
Understanding the printer menus
Use
Background Removal
‑4 to 4
Color Balance
Cyan - Red
Magenta - Green
Yellow - Blue
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Adjust ADF Skew
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
To
Adjust the amount of background visible on a scanned image.
Note: 0 is the factory default setting.
Enable an equal balance of colors in the scanned image.
Specify which color to drop and to adjust the dropout setting for each color
threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast in the scanned image.
Note: Best for content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Correct the slight skew in the scanned image.
Notes:
•
Auto is the factory default setting.
•
This menu item is supported only in select printer models.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
168
Advertisement
Table of Contents
