R&S SGU100A Getting Started page 33

®
R&S SGU100A
Risk of damaging components
Always use an appropriate 8 mm torque wrench to tighten SMA connectors.
Limit the tightening torque to 60 Ncm. Never use an open-end wrench.
[PCI Express Connector]
The PCIe (Peripheral Component Interconnect Express) single lane interface
allows remote control with optimized speed.
For details, see Chapter 2.3.3, "Connecting a Controller via PCI
on page 24.
[USB Connector]
The USB (universal serial bus) interface, type micro, allows you to connect vari-
ous external devices, e.g.:
● If the interface is configured as a device interface, the R&S SGU can be con-
nected to other devices like a remote computer. On the computer, you can
perform a firmware update, manual operation via the R&S SGMA-GUI soft-
ware or for remote control of the instrument.
● If the interface is configured as a host interface, a memory stick for file trans-
mission can be connected.
For details, see Chapter 2.3.4, "Connecting a Controller or a USB Device via
USB", on page 25.
[LAN Connector]
Getting Started 1418.2070.02 ─ 08
Instrument Tour
Rear Panel Tour
Express",
31