R&S SGU100A Getting Started page 40

®
R&S SGU100A
The diagram displays the connection state of the tested connections.
10. Select "SGMA-GUI > R&S SGS > Freq = 40 GHz", "Lev = -30 dBm".
11. Select "SGMA-GUI >SGS> RF > State > On" to enable the output of the CW
signal.
The extension adopts these values and states automatically and generates a
CW signal with RF = 40 GHz and Level = -20 dBm.
The signal is output at the [RF OUT] connector on the rear panel of the R&S
SGU.
Getting Started 1418.2070.02 ─ 08
First Steps with the Instrument
R&S SGU as an Extension to the R&S SGS
38