R&S SGU100A Getting Started page 35

®
R&S SGU100A
[I, Q IN / OUT]
The [I IN] and [Q IN] SMA female type connectors are the inputs of the I/Q modu-
lator, provided for feeding of external signal.
The [I OUT] and [Q OUT] SMA female type connectors are for direct output of the
analog I/Q signal.
NOTICE! Maximum input levels. Do not overload the I and Q inputs. The maxi-
mum permissible voltage is 1V. For details, refer to the data sheet.
Note: The I/Q modulator requires the hardware optionR&S SGU-B120V/-B140V.
[AC supply and power switch]
The AC supply and power switch allow you to connect the R&S SGU to the power
supply and switch on the instrument.
For details, see "To connect the AC supply"
Getting Started 1418.2070.02 ─ 08
on page 15.
Instrument Tour
Rear Panel Tour
33