Preparing For Use; Putting Into Operation - R&S SGU100A Getting Started

®
R&S SGU100A
2

Preparing for Use

● Putting into Operation......................................................................................11
● Linux Operating
● Connecting an External PC and
2.1

Putting into Operation

This section describes the basic steps to be taken when setting up the R&S SGU
for the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
● Do not open the instrument casing.
● Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measure-
ments and to avoid damage to the instrument. Observe the information on
appropriate operating conditions provided in the basic safety instructions
and the instrument's data sheet.
Getting Started 1418.2070.02 ─ 08
System..................................................................................18
Devices........................................................ 18
Preparing for Use
Putting into Operation
11