Equipment Specifications - Schulte FX-1800 Operator's Manual

The FX1800/FX1200 heavy duty rotary Cutter is designed primarily for weeds, grass,
and brush to 4" diameter. The side skirts are 13-5/8" deep. This additional room under
the deck, along with high blade tip speeds allows for a better cut and better material flow.
The one piece center shield allows for easy and full access to drivelines, clutches and
gearboxes on the center section.
FX1800
Cutting Width 180"
Transport Width:
(Singles on Wings) 93" (2.36m)
(Duals on Wings) 102" (2.59m)
Transport Height 84"
Overall Width 190"
Overall Length 202"
Cutting Height ------------- 1.75" -16.75"------------
--------- (44.5mm-425mm) ----------
HP Required (Min.) 50HP (37 kW)
Tractor HP 85HP (63 kW)
Weight 4563 lbs (2069 kg)
5113 lbs (2319 kg)
Hitch Weight 1702 lbs (772 kg)
Tractor PTO Speed ------------ 540 or 1000 RPM -----------
Cutting Cap. (Max) -------------- 4" (101.6 mm) --------------
Output Shaft -------------- 2.38" (60.3 mm) -----------
FX-1800/FX-1200 07/20
© 2020 Alamo Group Inc.
INTRODUCTION

Equipment Specifications

FX1200
126" Gearbox Rating
Divider
93" (2.36m) Center & Wing
Blade Tip Speed (540 RPM):
97.5" (2.47m)
84" Center
137" Wing
202" Blade Tip Speed (1000 RPM):
Center
Wing
Driveline:
45HP (34kW)
80HP (60kW) Main (CV):
4313 lbs (2319 kg)
4863 lbs (2205 kg)
Center & Wings
1602 lbs (727 kg)
Wing Working Range 25º down to 90° up
Wing Floating Range
Tongue Weight
Introduction Section 2-3
FX1800
260 HP (194kw)
210 HP (157kw)
------ 15980 ft./min. (4871m/min.) -------
------ 15459 ft./min. (4711m/min.) ------
------ 15974 ft./min. (4869m/min.) ------
------ 15708 ft./min. (4788m/min.) ------
540 RPM CAT 6
1000 RPM CAT 5
CAT 5
25º down to 30° up
1702 lbs.
FX1200
260 HP (194kw)
210 HP (157kw)
CAT 6
CAT 5
CAT 5
25º down to 90° up
25º down to 30° up
1602 lbs.