Table of Contents
Advertisement
Your FX-530 rotary cutter is primarily designed for crop shredding, grass, weeds and
brush up to 2" in diameter. The FX-530 is a premium built 30 foot (9.14 m) Rotary Cutter.
It features a five rotor design and incorporates a 10 gauge (3.4mm) Domed Deck to
eliminate corrosion due to the moisture and to make it very easy to clean. The drivelines
are low maintenance and have slip clutches at every 210 HP (157 kW) downbox. The
front hitch is equipped with a self leveling clevis to reduce drawbar wear. The FX-530
comes standard with deck protection rings to keep the blades from damaging the domed
deck. The wheel standards on this machine are adjustable to meet all crop row spacing
and uses special distribution panels to distribute material evenly and reduce clumping.
Cutting Width
Transport Width
Std Wheel Ext.
Row Crop Wheel Ext.
Overall Width
Overall Length
Cutting Height
HP Required (min.)
Cutting Capacity (max)
Weight
Hitch Weight
FX-530 06/21
© 2021 Alamo Group Inc.
INTRODUCTION
Equipment Specifications
30.4 ft. (9.3 m)
9.8 ft. (3 m)
12.75 ft. (3.88 m)
31.4 ft. (9.6 m)
19.7 ft. (6 m)
2-15 in (51-381 mm)
200 HP (37 kW)
2" (51 mm)
12300 lbs (5580 kg)
4500 lbs (2041 kg)
Introduction Section 2-3
Blade Tip Speed
1000 RPM
16300 ft./min. (4970 m/min.)
Gearbox
Down Box Rating
210 HP (157 kW)
Divider Gearbox Rating
350 HP (261 kW)
Limited Warranty
3 Year
Driveline Size
Cutter
CAT 5 & 6
1000 RPM Input Shaft
CAT 6
Limited Warranty
1 Year
Advertisement
Table of Contents
