Schulte FX-1800 Operator's Manual page 108

OPERATION
13.2 Manual Winch Kit Operating Instructions (Winch Kit Optional)
If your winch cable has not been pre-assembled onto the winch, or you are replacing your cable for any
reason, please follow the instructions below:
1. Place the cable through the hole on the winch as shown in Figure Ops-1541.
2. Now bolt the cable to the winch using the retaining plate and the two carriage bolts, two lock washers and
nuts as shown in Figures Ops-1542 & Ops-1543.
Sharp objects such as wire, can cut your fingers.
FX-1800/FX-1200 07/20 Operation Section 4-50
© 2020 Alamo Group Inc.