Parts Information; Lubrication - Schulte FX-1800 Operator's Manual

PARTS INFORMATION

Schulte Products use balanced and matched system components for blade carriers, blades, cuttershafts,
knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to
Schulte Industry specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The
use of "will fit" parts may reduce the performance, void Schulte warranties, and present a safety hazard. Use
genuine Schulte parts for economy and safety.
Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected. Only a
minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and
trouble free operation.
Always disengage the PTO before raising the Rotary Cutter for transporting or making
adjustments.
NOTE: Some guards and shields have been removed from the illustrations and pictures for instructional clarity.
DO NOT operate implement without all shields and guards in place and in good condition.

Lubrication

Grease points around the cutter will be identified by one of the following greasing decals. In some cases,
multiple grease points may be identified by a single decal if they are close together and the require the same
greasing schedule.
FX-1800/FX-1200 07/20
© 2020 Alamo Group Inc.
MAINTENANCE
PARTS INFORMATION
(SPSI-1)
SEE YOUR SCHULTE DEALER
Maintenance Section 5-4