Schulte FX-1800 Operator's Manual page 45

SCHULTE INDUSTRIES LIMITED - FX1200/FX1800
GENERAL STATEMENT AFFECTING ALL SCHULTE WARRANTY
Schulte Industries Ltd. warrants to the original purchaser only, that in the event of any defect in material or
workmanship in the product sold by Schulte Industries, the subject of this warranty ("the goods") during the
warranty period mentioned below the manufacturer will provide the coverage specified below.
This warranty is in place of any other warranty or guarantee whether implied or expressed in any conditions of
purchase of the buyer, and does not extend to impose any further liability on the manufacturer than set out
below.
Any work done to the product without being authorized by Schulte, may not be
covered by Schulte.
WARRANTY COVERAGE: All coverage applies to manufacturer's defects only.
For Commercial, Agricultural, and Government Use
• Structural Warranty is 1 year from the date of purchase.
• Component is 1 year from the date of purchase. Components include hydraulics, hubs and spindles,
blade carriers, and light kits. (Refer to Gearbox, Driveline and Power Shaft warranty sections).
• Driveline warranty is 1 year from the date of purchase. Warranty covers cross kits, tubes, and yokes.
Coverage applies only to manufacturer's defects when product is properly maintained and
lubricated.
6 Year Gearbox Warranty (Coverage applies to manufacturer's defects only)
• 100% parts, labor, and freight cost for year 1 and 2.
• 100% parts and labor cost for years 3, 4, 5, 6.
2 Year Seal Warranty (Coverage applies to manufacturer's defects only)
• 100% parts, labor, and freight cost for year 1.
• 100% parts only for year 2.
For Rental Use
• Component Warranty (including gearboxes and drivelines) is 30 days from the first in-service date.
• Tires and Rims are covered for 30 days against manufacturer's defects only.
• Structural warranty is 30 days from the first in-service date.
Coverage includes replacement parts and labor. Only Schulte replacement parts qualify under this coverage.
FX-1800/FX-1200 07/20
© 2020 Alamo Group Inc.
INTRODUCTION
Introduction Section 2-5