Equipment Specifications - Schulte 2 Series Operator's Manual

The FX318/FX212 heavy duty rotary Cutter is designed primarily for weeds, grass, and
brush to 3-1/2" diameter. The side skirts are 13-5/8" deep. This additional room under the
deck, along with high blade tip speeds allows for a better cut and better material flow.
The one piece center shield allows for easy and full access to drivelines, clutches and
gearboxes on the center section.
FX-318
Cutting Width 216"
Transport Width
(Singles on Wings) 86"
(Duals on Wings) 96"
Transport Height 109"
Overall Width 228"
Overall Length 208"
Cutting Height 1.75" - 16.75"
(44.5mm - 425mm)
HP Required (min.) 75 HP (56 kW)
Tractor HP 90 HP (67 kw)
Cutting Capacity (max) 3.5" (89 mm)
Weight 5,800 lbs (2630 kg)
Hitch Weight 2350 lbs (1065 kg)
Tractor PTO Speed 540 or 1000 RPM
Cutting Capacity (Max) 3.5" (89mm)
Output Shaft 2.38" (60.3mm)
Wing Working Range 25 down to 80 up
Wing Floating Range 25 down to 30 up
FX-318 - FX212 08/21
© 2021 Alamo Group Inc.
INTRODUCTION

Equipment Specifications

FX-212
144"
90"
95"
109"
160"
208"
1.75" - 16.75"
70 HP (52kW)
85 HP (63kW)
3.5" (89 mm)
5,750 lbs (2614 kg)
2234 lbs (1015 kg) Main (CV)
540 or 1000 RPM
3.5" (89mm)
2.38" (60.3mm)
25 down to 80 up
25 down to 30 up
Introduction Section 2-3
Blade Tip Speed (540 RPM)
Center 15980 ft/min (4871m/min)
Wing 16319 ft/min. (4974 m/min)
Blade Tip Speed (1000 RPM)
Center 15974 ft/min (4869m/min)
Wing 16581 ft/min (5054m/min)
Gearbox Rating
Divider 260 HP (194 kW)
Center & Wing 210 HP (157 kW)
Limited Warranty 6 Year
Driveline
540 RPM CAT 6
1000 RPM CAT 5
Center & Wings CAT 5
CAT 6
CAT 5
CAT 5