Schulte FX-1800 Operator's Manual page 80

• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
• Ensure each mower slip clutch shield is
secured in place and in good condition.
• Ensure the driveline slip clutch friction plates
are not frozen together. Reference
Maintenance Section for proper slip clutch
maintenance.OPS-R-0010_G
• Perform scheduled lubrication as specified in
the maintenance section.
• Inspect each gearbox oil level using dipstick
level indicator and replenish if needed. A low
oil level is a warning sign that the gearbox may
be cracked or its seal is damaged and needs to
be replaced.
• Ensure all gearbox vents are in place and free
from clogs. OPS-R-0011_M
• Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and
are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports.
IMPORTANT: DO NOT use your hands to check for
oil leaks. Use a piece of heavy paper or cardboard
to check for hydraulic oil leaks. OPS-R-0013_E
FX-1800/FX-1200 07/20
© 2020 Alamo Group Inc.
OPERATION
the
Operation Section 4-22