Table of Contents
Advertisement
1.888.610.7664
# DANGER
To avoid getting electrical shocks, disconnect the test leads from the
instrument before replacing the metal tip or adapter.
6-2 Battery voltage check
(1) P lease refer to 16. Battery replacement in this manual and insert batteries
in the instrument.
(2) S et the function switch to any position other than OFF to power on the
instrument.
(3) C heck the battery status indicator displayed at the upper left corner of the
LCD.
: Normal. Battery voltage is enough.
: L ow battery voltage：For continuous measurement, please refer
to 16. Battery replacement and replace the batteries with new
ones.
: B attery voltage is below the lower limit of the operating voltage.
I n such a condition, accuracy of the measured result isn t
guaranteed. Replace the batteries with new ones immediately.
● B attery status indicator might change from
measurement depending on measured objects; for example, resistance of
the object is low.
● U se of AA alkaline battery is recommended. Using other type of batteries
may cause improper indication of battery level.
̶ 17 ̶
www.calcert.com
15
10
20
5
25
0
30
to
during a
sales@calcert.com
Advertisement
Table of Contents
